How to Install TWRP Recovery and Root LG G6 H870

0
17298
views

Hi guys, we are going to teach you how you can install TWRP and Root LG G6 H870. Rooting device and installing TWRP there are lots of advantages, we will tell you about the advantages later.  Just remember one thing if you are doing any installation or Rooting the only thing which you have to do is “enable USB debugging” and unlock OEM. After installing TWRP and rooting the devices, we can install custom ROMs, some hacking apps, some useful and premium apps also so these are the advantages.

We have shared the full guide, How to Install TWRP Recovery and Root LG G6 H870. If you are interested in installing TWRP Recovery and Root LG G6 H870 then, must read this guide. We have also provided the important download links, go and check it out.

Read this also: Install LG Stylo 2 Plus Android Nougat Firmware (T-Mobile)

Disclaimer

Androidtalkie.com is not responsible for any damage caused to your mobile during the process. DO IT AT YOUR OWN RISK. How to Install TWRP Recovery and Root LG G6 H870.

Pre-Requirements

Make sure your phone is charged up to 80%
Make the Backup of important apps, messages, and contacts.
Don’t try this guide on any other phone.

Download

TWRP Recovery for LG G6 H870

SuperSu to root LG G6

no-verity-opt-encrypt-5.1.zip for LG G6

Steps To Install TWRP Recovery and Root LG G6

First of all, enable USB Debugging and download all the files which are given in the download section.

Now, go to installation directory open ADB folder and open the CMD window by pressing and hold the ‘shift’ key and right-click anywhere in that folder.

cmd 6

Now connect your phone to PC and reboot the device into fastboot mode by typing

adb reboot bootloader

You are in the Fastboot mode now to check your connection by entering below command in command prompt. It will return your device serial number means your device properly connected. Check your driver if the above command is not responding.

fastboot devices

How to root k3 note

Type the below command correctly in command prompt and then press enter. It will install TWRP recovery on LG G6

fastboot flash recovery recovery.img

fastboot recoveery

Now, unplug your phone and boot into TWRP Recovery. (If your device is not in TWRP mode then press and hold “power & Vol. down button together, then you will feel a vibration then release the power button and continue pressing the  Vol. down button)

 

How To Root LG G6 –

From the main menu navigate to Install Zip and select ‘no-verity-opt-encrypt-5.1.zip’. (If internal memory does not show up then Go to “Wipe” section and tap “Format Data”, and type “yes” and transfer the no-verity-opt-encrypt-5.1.zip and SuperSu via MTP)

Swipe to flash no-verity-opt-encrypt-5.1.zip and after that flash SuperSu.

Voila, you have successfully rooted your device.

Source – XDA

 

If you have any question regarding this, you can ask me via FB page or Comment section.

Hope you like this post. 🙂

 

 

LEAVE A REPLY

Please enter your comment!
Please enter your name here